BMW/Mini Glass Replacement Requirements

Posted on: 20 October 2016

The role of the windshield is a lot more complex than simply allowing a view of the road ahead. It is considered a structural part of the vehicle as it contributes to the strength of the roof and A-pillars. The windshield helps to manage collision energy and has become an integral part of several advanced safety systems.

It is commonly asked, "What is required when replacing a windshield?" With this question in mind, we are presenting a series of articles that highlight some of the requirements from the various OEMs. As always, it is important to read through each vehicle-specific procedure to ensure a complete, safe, and quality repair.

Let’s see what BMW/Mini has to say for the 2016-2024 model years.

BMW specifies the use of their own adhesive, and cleaning solutions.
BMW/Mini specifies the use of Sika cleaning solution, activator, and primer for bonded glass.
Be sure to refer to the urethane manufacturer’s directions for curing time specifications, and do not use adhesive after its expiration date.
BMW/Mini specifies using either Roll Out 2000 which is a wire cutting system, or Spider, which is a nylon string cutting system. The vehicle-specific procedure states which system is to be used.

As special cautions, vehicles equipped with:

Camera-based driver support system needs to have the system calibrated.
Compass may need to be calibrated if the compass is not functioning after the rearview mirror is installed.
Rain sensor needs calibration depending upon which type of sensor. Refer to Overview, Rain Sensor (additional work when replacing the windscreen/sensor replacement) document.
Head-up display, requires a special OEM replacement windshield.

To access vehicle-specific BMW stationary glass removal and installation procedures go to: www.bmwtechinfo.com

To access vehicle-specific Mini stationary glass removal and installation procedures go to: www.minitechinfo.com

For additional BMW/Mini information, check out the following pages:
BMW OEM Information
Mini OEM Information

Additional I-CAR Collision Repair News you may find helpful:

Related I-CAR Courses

Toyota/Lexus/Scion Position Statement: Pre- and Post-Repair System Scanning Thursday, 28 July 2016
As the industry continues to ask if pre- and post-repair system scanning is necessary, Toyota/Lexus/Scion provides their answer.
Pre- and Post-Repair System Scanning Statements Wednesday, 9 January 2019
Are you wondering if a particular OEM or organization has a published statement on pre-repair and post-repair scanning? We have compiled a list of most of the statements on the subject, so you can...
ADAS, Calibration, And Scanning Article Hotspot Monday, 14 January 2019
Since advanced driver assistance systems (ADAS), scanning, and calibration first started becoming relevant, members of the collision repair industry have required as much knowledge as possible on...
Honda/Acura Position Statement: Pre- and Post-Repair System Scanning - UPDATE Wednesday, 22 May 2019
Honda /Acura has updated their position statement on pre- and post-repair scanning to give more clarification on what is expected for scanning.
BMW Position Statement: Pre- and Post-Repair System Scanning - UPDATE Friday, 10 April 2020
BMW has released a position statement related to pre- and post-repair system scanning. The statement applies to All vehicles equipped with on board diagnostics II (OBD II).
Quickly Identifying Outer Quarter Panels w/Rolled Hem Flanges Monday, 5 March 2018
The I-CAR best practice article, Recycled Outer Quarter Panels w/Rolled Hem Flanges has gotten a lot of interest from the collision repair industry. It’s important to know which vehicles are...
General Motors Position Statement: Pre- and Post-Repair System Scanning Friday, 21 October 2016
As the industry continues to ask, are pre- and post-repair scans necessary, General Motors provides their answer.
Restraints Wiring Repairs Monday, 23 May 2016
Over the past few months, we've been sharing OEM position statements on restraints wiring repairs. Now we're bringing them all together in one place for easy reference.
FCA/Stellantis Position Statement: Pre- and Post-Repair System Scanning Thursday, 9 June 2016
FCA/Stellantis has released a position statement related to pre- and post-repair system scanning.
Nissan/INFINITI Position Statement: Pre- and Post-Repair System Scanning - UPDATE Monday, 14 January 2019
Nissan/INFINITI updated their position statement on pre- and post-repair scanning. The revised position statement touches on more subjects and gives additional information on the subject.

Repairer Driven News: Rivian Updates Door Handle Procedure Sunday, 4 February 2035
Repairer Driven News (RDN) released an article featuring an updated Rivian procedure.
Body Construction And Material Repair Guidelines: Toyota/Lexus - UPDATE Tuesday, 30 September 2025
What is the MPa of the front lower rail? What is the outer uniside made of: steel, aluminum, or composite? Can heat be used to straighten or is it cold straightening only? What are the repair...
I-CAR Repairers Realm: Ford Explorer Rear Rail Sectioning - Now Available Friday, 26 September 2025
I-CAR had a discussion on 2020-2025 Ford Explorer rear rail sectioning.
Digital Key Considerations: FCA/Stellantis Wednesday, 24 September 2025
The intermingling of technology and automobiles continues, with digital key offerings from most vehicle makers. Digital keys utilize smartphone technology to expand vehicle access and owner...
App-Based Connected Services Considerations: FCA/Stellantis Wednesday, 24 September 2025
Have you had an experience where the vehicle notified the owner that it was being moved while it was in your repair facility? App-based connected services are available from many vehicle makers and...
Backup Battery And Low-Voltage Disconnect: Mazda Friday, 19 September 2025
When an accident happens, how will you call for help? Maybe the telematics system, equipped with a backup battery, could automatically do this, even if the main power is cut off. What are the repair...
Body Repair Manual Symbols: Kia Wednesday, 17 September 2025
While looking at repair procedures in a body repair manual (BRM) you may notice that symbols are used to indicate specific operations or parts to be used during the repair process. Most BRMs provide a...
I-CAR Just In Time: Mirror Matching Parts Monday, 15 September 2025
Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips...
I-CAR Just In Time: Blend Panel Prep And Toner Replacement Wednesday, 10 September 2025
Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips...
GM Repair Insights: Summer 2025 Monday, 8 September 2025
The summer edition of General Motors (GM) Repair Insights is now available.

BMW/Mini Glass Replacement Requirements

Related I-CAR Courses

Top Ten Vehicle Specific Questions

Top Ten I-CAR Specific Questions