Close
Your job requires that you keep on top of the latest in vehicle, tool, and equipment technology – I-CAR is committed to helping you do so in one convenient place. We regularly publish new articles highlighting the latest and greatest collision repair information.
So check back often and follow us on X @Ask_ICAR to ensure you’re equipped with the most up-to-date collision repair technical information available in the industry.
Acura released a Repair News bulletin for the 2022 Acura MDX. This document provides relevant repair information at a glance for this redesigned vehicle.
The Polestar advanced driver assistance systems (ADAS) position statement can now be accessed directly from the I-CAR RTS Portal. Let’s take a look at what this position statement includes.
The spring edition of General Motors (GM) Repair Insights magazine is now available.
When researching procedures for disabling a high-voltage (HV) vehicle, you may notice that many of the procedures require the use of specific tools. Some of them are OEM-specific tools or scan tools. Often identifying and locating where to purchase these specific tools can be difficult.
The steering system is considered one of the most important and necessary systems on a vehicle. After all, without steering, the driver couldn’t control the vehicle. This makes it important to know what the OEM recommends when it comes to this system. Let’s take a look at what Rivian has to say.
Aluminum is more common than ever on today’s vehicles. What can you do when an aluminum dent has stretched during the repair process?
When repairing Tesla vehicles, it is important to read repair guidelines in the body repair manual, especially when it comes to repairing parts or panels that impact sensors are mounted to. Let’s see what Tesla has to say.
What is the MPa of the front lower rail? What is the outer uniside made of: steel, aluminum, or composite? Can heat be used to straighten or is it cold straightening only? What are the repair limitations? These are just some of the questions that the RTS team fields on a daily basis.
As part of the I-CAR Repairability Technical Support (RTS) OEM linking pin activity, we are helping to connect the collision repair industry to the vehicle makers. We’ve had a technical inquiry that asked for clarification of "surrounding parts" in a statement related to the calibration of Genesis advanced driver assistance systems (ADAS) components.
Did you know that Honda has a Job Aid about supplement restraints system (SRS) troubleshooting and repair information?
I-CAR had a discussion on the consideration of part removal at factory seams.
Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips and tricks. These videos enable you to, in less than 5 minutes, learn something new. Let’s check out what the team has added for steering knuckle damage inspection and inner tie rod damage.
Repairer Driven News (RDN) released an article featuring an updated Rivian procedure.
High-voltage (HV) vehicles have some special considerations for handling and storing HV batteries and other components. The dangers of HV batteries are potential even after removal which is why certain precautions are needed. Let’s see what General Motors (GM) has to say.
Acura released a Body Repair News bulletin for the 2025 Acura ADX. This document provides relevant information at a glance for this model.
As the industry continues to ask if pre- and post-repair system scanning is necessary, Toyota/Lexus/Scion provides their answer.
Are you wondering if a particular OEM or organization has a published statement on pre-repair and post-repair scanning? We have compiled a list of most of the statements on the subject, so you can...
Since advanced driver assistance systems (ADAS), scanning, and calibration first started becoming relevant, members of the collision repair industry have required as much knowledge as possible on...
Honda /Acura has updated their position statement on pre- and post-repair scanning to give more clarification on what is expected for scanning.
BMW has released a position statement related to pre- and post-repair system scanning. The statement applies to All vehicles equipped with on board diagnostics II (OBD II).
The I-CAR best practice article, Recycled Outer Quarter Panels w/Rolled Hem Flanges has gotten a lot of interest from the collision repair industry. It’s important to know which vehicles are...
As the industry continues to ask, are pre- and post-repair scans necessary, General Motors provides their answer.
Over the past few months, we've been sharing OEM position statements on restraints wiring repairs. Now we're bringing them all together in one place for easy reference.
FCA/Stellantis has released a position statement related to pre- and post-repair system scanning.
Nissan/INFINITI updated their position statement on pre- and post-repair scanning. The revised position statement touches on more subjects and gives additional information on the subject.
Repairer Driven News (RDN) released an article featuring an updated Rivian procedure.
What is the MPa of the front lower rail? What is the outer uniside made of: steel, aluminum, or composite? Can heat be used to straighten or is it cold straightening only? What are the repair...
I-CAR had a discussion on 2020-2025 Ford Explorer rear rail sectioning.
The intermingling of technology and automobiles continues, with digital key offerings from most vehicle makers. Digital keys utilize smartphone technology to expand vehicle access and owner...
Have you had an experience where the vehicle notified the owner that it was being moved while it was in your repair facility? App-based connected services are available from many vehicle makers and...
When an accident happens, how will you call for help? Maybe the telematics system, equipped with a backup battery, could automatically do this, even if the main power is cut off. What are the repair...
While looking at repair procedures in a body repair manual (BRM) you may notice that symbols are used to indicate specific operations or parts to be used during the repair process. Most BRMs provide a...
Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips...
Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips...
The summer edition of General Motors (GM) Repair Insights is now available.